Loki Kit
Loki Kit
95 in stock
Processing Time: ~2 business days
Couldn't load pickup availability
Named after the Norse god of mischief, the Loki kit tricks Bitmain X19 miners into hashing from any suitable DC power supply. Want to run your X19 rig from a 120V outlet? Use the Loki kit to make it possible and unlock new gen miner hash rates and efficiencies.
Using the Loki Kit to build a 120V modified miner ("Loki Rig") will require some DIY building and creativity. You'll need a power supply that can run from 120V, at least one X19 hash board, a control board, an enclosure, and a way to keep everything cool. If running from a 120V standard outlet, be sure to keep the miner's power draw under 1500W to avoid overloading the circuit breaker. Refer to the Loki Kit User Manual for more details.
Important: There are 3 different Loki Kit variants. Selecting the correct variant for your miner depends on three factors: miner firmware, control board type, and hash board type. Use the buttons below to configure your Loki Kit variant. You can also check out the Loki Bingo card for more configuration details. Don't see your miner configuration? Don't hesitate to reach out to us. You may qualify for half off on your Loki Kit if you're willing to test a new configuration.
Let customers speak for us
I have placed a couple orders with the guys at Nakamoto mining. A high quality product. Definitely get the Njord board for the most effective energy management on the miner. Bottom line, you are not running thee in your house without some noise reduction. You should buy this RIGHT after getting the particular model of s21. PRO and XP you should run 10" shrouds for max effectiveness. I am testing further. Below pro an 8" will be fine. The 10" shroud increases your form fctor by 12" in length and is considerably "bulkier" than the 8" fan and shroud. 10" shroud kit on an s21 XP is 41" long. You need 110 power by your 240 as well. Also an 21 needs a 30AMP pdu and you cn only run ONE per 30AM pdu. my s21s have drawn as much as 22 and onthe shroud run 11-14 amps. Further testing needed. Great product. Thanks Nakamoto San!!
Print quality on the KS5L shroud was solid. The Kaspa fan cover got a micro crack when I put it on, but works fine and isn’t noticeable. The plebtech board is like magic. The stickers and extras made my day. All around good experience. Shipping could be faster, but wasn’t bad.
These are hands down the most beautiful shrouds on the market. barely looks 3D printed. Highly recommend these
Super quick, quality delivery and working very well. Just as advertised!
Fantastic product.
These work great. I've purchased almost a dozen units and not one has failed. Worth every penny. Make sure you use AC Infinity fans and the Njord board fan controller as well. Super easy and quick way to domesticate your ASIC.
Fits perfectly with the ac infinity!
Shrouds look and fit great. I will order more. My garage will be toasty warm this winter.
I'm in France, the shippment was very fast and the product make the job, I have test one only and it work...
Perfect
Fast shipping and works with ks5 and ks5-pro
Works great with my S19J Pro hashboard and APw7. Highly recommend
ASIC Fan Spoofers Simulators (Antminer S19, S21, L7, KS3, KS5, IceRiver)
worked perfectly and as expected!
Ordered completed with the goods products, fast delivery. I recommend strongly
Helped keep my miners clean! Love it