Bitmain Antminer APW7 Power Supply PSU
Bitmain Antminer APW7 Power Supply PSU
Low stock: 2 left
Processing Time: ~2 business days
Couldn't load pickup availability
Bitmain Antminer APW7 Power Supply unit (PSU)
Works with Loki Kit to transform your S19 hashboard to run on 110V 🔥
- Does NOT include power cord by default
- APW7 does not exceed 1,200W for 110V Loki Configs
SPECIFICATIONS
Output
DC voltage: 12.15 V
Rated current (220V input): 133 A
Rated current (110V input): 100 A
Rated power (220V input): 1,800 W
Rated power (110V input): 1,000 W
Interface type: 5-pair 6-pin PCIE connector (10 connectors)
Noise level <43 dB
Input Value
Voltage range: 100-240 V A / C
Starting voltage: 95-105 V A / C
Frequency range: 47-63 Hz
Surroundings
Working temperature: -20°C-50°CWorking humidity: 20%-90% relative humidity (no condensation)
Structure: size 220 x 108 x 62 mm
Cooling fan: forced air cooling
Let customers speak for us
Loki Kits are a must have for 120v mining and Nakamoto Mining is my favorite hook up to get them. Fast shipping and well packed.
Removed stock fans and installed the fan shrouds on a S19 K Pro along with a Njord board to control an AC Infinity 8" fan. Much better cooling along with much lower noise. The fan shrouds are thick, heavy duty, and fit perfect. Highly recommended.
Love the look and functionality of my new S19 shroud kit. Much quieter and make mounting on my garage wall look real nice. I went into a 8" 90 deg pipe to a vent outside my wall so I can run it all year without overheating my garage.
Good quality printed enclosure for home mining! Would buy again!
Order was correct 👍
I have placed a couple orders with the guys at Nakamoto mining. A high quality product. Definitely get the Njord board for the most effective energy management on the miner. Bottom line, you are not running thee in your house without some noise reduction. You should buy this RIGHT after getting the particular model of s21. PRO and XP you should run 10" shrouds for max effectiveness. I am testing further. Below pro an 8" will be fine. The 10" shroud increases your form fctor by 12" in length and is considerably "bulkier" than the 8" fan and shroud. 10" shroud kit on an s21 XP is 41" long. You need 110 power by your 240 as well. Also an 21 needs a 30AMP pdu and you cn only run ONE per 30AM pdu. my s21s have drawn as much as 22 and onthe shroud run 11-14 amps. Further testing needed. Great product. Thanks Nakamoto San!!
Print quality on the KS5L shroud was solid. The Kaspa fan cover got a micro crack when I put it on, but works fine and isn’t noticeable. The plebtech board is like magic. The stickers and extras made my day. All around good experience. Shipping could be faster, but wasn’t bad.
These are hands down the most beautiful shrouds on the market. barely looks 3D printed. Highly recommend these
Super quick, quality delivery and working very well. Just as advertised!
Fantastic product.
These work great. I've purchased almost a dozen units and not one has failed. Worth every penny. Make sure you use AC Infinity fans and the Njord board fan controller as well. Super easy and quick way to domesticate your ASIC.
Fits perfectly with the ac infinity!
Shrouds look and fit great. I will order more. My garage will be toasty warm this winter.
I'm in France, the shippment was very fast and the product make the job, I have test one only and it work...
Perfect
Fast shipping and works with ks5 and ks5-pro